FMD090EV EXTENDED VOLUME METER PROVER
FMD’s latest addition to its proving family is the state-of-the-art Extended Volume Prover Line. The FMD-090EV small volume meter prover is designed specifically for proving manufactured pulse meters such as Coriolis, ultrasonic and helical turbine meters. With a 50% greater volume capacity, at 120 gallons compared to 80 gallons for the standard FMD-090, the FMD-090EV allows for larger sample sizes and extended flight times making it the ideal choice for proving manufactured pulse meters.
SPECIFICATIONS
| Max Flow Rate* | ||
|---|---|---|
| BPH | M3H | GPM |
| 12,850 | 2,000 | 9,000 |
| *FMD wants to ensure that you get the proper Prover for your application. Our Provers are compatible with most meter types, including Coriolis, Turbine, Helical Turbine, Positive Displacement, and, Ultrasonic. Meter type, operating conditions, and fluid characteristics will affect prover sizing. Please reach out to us to discuss your specific application and the optimal FMD Prover for your application. |
||
| Turndown | |
|---|---|
| 1200:1 | Turndown is typical of normal operations. Turndown ratio can vary significantly depending on installation and process conditions. Actual turndown may be much greater than 1200:1 in some conditions such as water draw, or much less in high pressure, dry product applications such as NGL service. |
| Pressure Drop | |
|---|---|
| 5 psi at max flow rate of each prover (calculated with water) |
| Performance | |||
|---|---|---|---|
| Performance | Exceeds 0.02% ISO17025 Calibration Lab | ||
| Repeatability | < 0.02% – Exceeds API Standard | ||
| Uncertainty | Typically 0.008% (Water draw) | ||
ADDITIONAL SPECIFICATIONS
| Displaced Volume – FMD-090EV | |||
|---|---|---|---|
| Gallons | Liters* | ||
| Primary | Secondary | Primary | Secondary |
| 120 | 80 | 450 | 340 |
| *Please Note: Standard prover volume is in gallons, liters are optional. Prover requires non-standard switchbar for liters. Alternate displaced volumes are available for liters, please contact factory for additional information. Liters are a direct conversion and not indicative of Seraphin can sizes. | |||
| FMD-090EV Small Volume Prover Dimensions (inches) | ||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Pressure Rating | A | B | C | D | E | F | G | H | J | K | L | M | N | P | Q | R | S | T | U | |||
| Min | Max | |||||||||||||||||||||
| 150# | 59.62 | 58.21 | 287.75 | 51.50 | 119.75 | 64 | 120 | 32 | 111 | 30 | 141 | 34 | 1 | 37.75 | 82.25 | 27 | 64 | 14 | 126 | 19.13 | ||
| 300# | 59.62 | 58.21 | 287.75 | 51.50 | 119.75 | 64 | 120 | 32 | 111 | 30 | 141 | 34 | 1 | 37.75 | 82.25 | 27 | 64 | 14 | 126 | 19.75 | ||
| 600# | 59.62 | 58.21 | 287.75 | 51.50 | 119.75 | 64 | 120 | 32 | 111 | 30 | 141 | 34 | 1 | 37.75 | 82.25 | 27 | 64 | 14 | 126 | 21.25 | ||
| 900# | Please contact factory for dimensions | |||||||||||||||||||||
| Drawings Notes:All dimensions are shown in inches. 1. Dimensions “K” and “L” are for center of gravity within 6 inches. 2.Spacial dimensions have a tolerance of 1.00 inches. 3. Dimension “P” is inlet-to-outlet flange distance, drains and vents may vary. 4. All FMD-130 600# and FMD-200 models have 8 lifting lugs. Table gives dimensions to outermost lugs. 5. All dimensions are subject to change without notice. 6. For TT configurations see specific outline. 7. Dimension “H” max is the distance required to remove fully assembled piston assembly from the prover. Complete seal change may be done with piston not completely removed which requires 32”. |
||||||||||||||||||||||
| FMD-090EV Weights | ANSI Pressure – 150# | ANSI Pressure – 300# | ANSI Pressure – 600# | ANSI Pressure – 900# | |||||
|---|---|---|---|---|---|---|---|---|---|
| Weight +/- 5% | LBS | KGS | LBS | KGS | LBS | KGS | LBS | KGS | |
| 11,625 | 5,275 | 11,816 | 5,360 | 12,010 | 5,450 | 15,600 | 7,080 | ||
| Weight with Crate +/- 5% | 13,080 | 5,935 | 13,271 | 6,020 | 13,465 | 6,110 | 17,055 | 7,740 | |
| Weight filled with Water +/- 5% | 13,425 | 6,090 | 13,616 | 6,180 | 13,810 | 6,270 | 17,400 | 7,900 | |
| FMD-090EV Motor Voltage – Phase Availability – Amperage Draw | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Motor HP | 120 VAC | 220 VAC | 208-240 VAC | 380-400 VAC | 440-480 VAC | |||||||
| 1 Phase | 1 Phase | 3 Phase | 3 Phase | 3 Phase | ||||||||
| 50-60 Hz | 50-60 Hz | 50-60 Hz | 50-60 Hz | 50-60 Hz | ||||||||
| 2.0 | 22 | 11.6 | 8.6 | 5.2 | 2.9 | |||||||
FMD-090EV Approvals and Certifications
| ISO | 9001:2015, 17025:2005 |
| CE | Mach Dir:2006/42/EC, EN 12100-2:2003 |
| ATEX | 2014/34/EU II 2(1)G Ex db mb [ia Ga] IIB T3 Gb / -20 °C to +40 °C / Cert#: CSANe 25ATEX1007X |
| CSA (US & Canada) | Class I, Division 1, Groups C and D, Class I Division 2, Groups C and D – Maximum Operation Ambient 60°C – Class I, Division 1, Group D, Class I, Division 2, Group D – Maximum Operation Ambient 40°C – Cert#: 2137671 |
| IECEx | Ex db mb [ia Ga] IIB T3 Gb / -20 °C to +40 °C / Cert#: IECEx CSA 25.0009X |
| ABSA | CRN: OF1072.2 |
Documentation
As with all FMD provers, the FMD-090EV exceeds the accuracy standards required by API MPMS Chapter 4 and delivers best-in-class performance. This advanced meter prover provides 12″ ANSI flanges, 2″ drains/vents and ports for verifying pressure and temperature. Flow MDs small volume provers provide exceptional performance, quality, and field durability, making the FMD090EV an exceptional choice for all of your proving applications.
- Designed for a wide range of liquid measurement applications (see our Applications Specific Prover Page or our Frequently Asked Questions for additional application information).
- All FMD Provers conform to API MPMS Chapter 4 Standards
- Materials of Construction: Stainless Steel – 304 or 316, Duplex Steel
- Standard flange size: 12″ ANSI B16.5
- 2″ drain flanges, 2″ thermowell vents
KEY FMD PROVER BENEFITS