FMD-007 SMALL VOLUME METER PROVER
Flow MD leads the industry in small volume meter prover technology. Our innovative and patented design ensures superior performance, design, and functionality. Learn More about the exceptional performance, quality, and field durability of the FMD-007 Small Volume Prover below.
SPECIFICATIONS
| FMD-007 Max Flow Rate* | ||
|---|---|---|
| BPH | M3H | GPM |
| 1,000 | 150 | 700 |
| *FMD wants to ensure that you get the proper Prover for your application. Our Provers are compatible with most meter types, including Coriolis, Turbine, Helical Turbine, Positive Displacement, and Ultrasonic. Meter type, operating conditions, and fluid characteristics will affect prover sizing. Please reach out to us to discuss your specific application and the optimal FMD Prover for your application. |
||
| FMD-007 Turndown | |
|---|---|
| 1200:1 | Turndown is typical of normal operations. Turndown ratio can vary significantly depending on installation and process conditions. Actual turndown may be much greater than 1200:1 in some conditions such as water draw, or much less in high pressure, dry product applications such as NGL service. |
| FMD-007 Pressure Drop | |
|---|---|
| 5 psi at max flow rate of each prover (calculated with water) |
| FMD-007 Performance | |||
|---|---|---|---|
| Performance | Exceeds 0.02% ISO17025 Calibration Lab | ||
| Repeatability | < 0.02% – Exceeds API Standard | ||
| Uncertainty | Typically 0.021% (Water draw) | ||
ADDITIONAL SPECIFICATIONS
| FMD-007 Displaced Volume | |||
|---|---|---|---|
| Gallons | Liters* | ||
| Primary | Secondary | Primary | Secondary |
| 5 | 4 | 19 | 15 |
| *Please Note: Standard prover volume is in gallons, liters are optional. Prover requires non-standard switchbar for liters. Alternate displaced volumes are available for liters, please contact factory for additional information. | |||
| FMD-007 Small Volume Prover Dimensions (inches) | |||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Pressure Rating | A | B | C | D | E | F | G | H | J | K | L | M | N | P | Q | R | S | T | U | U* | |
| Min | Max | ||||||||||||||||||||
| 150# | 52.57 | 39.29 | 123.25 | 29 | 43 | 35.25 | 97 | 32 | 42 | 30 | 69 | 18 | 1 | 19.63 | 30 | 7.88 | 38 | 19 | 40.25 | 6.38 | 11.38 |
| 300# | 52.57 | 39.29 | 123.25 | 29 | 43 | 35.25 | 97 | 32 | 42 | 30 | 69 | 18 | 1 | 19.63 | 30 | 7.88 | 38 | 19 | 40.25 | 7.88 | 12.88 |
| 600# | 52.57 | 39.29 | 123.25 | 29 | 43 | 35.25 | 97 | 32 | 42 | 30 | 69 | 18 | 1 | 19.63 | 30 | 7.88 | 38 | 19 | 40.25 | 8.25 | 13.25 |
| 900# | 51.08 | 39.29 | 123.25 | 29 | 43.88 | 34.38 | 97 | 32 | 43 | 30 | 70 | 19 | 2 | 20.38 | 30 | 8.38 | 37.15 | 19 | 41.13 | 9.38 | 14.38 |
| Drawings Notes: All dimensions are shown in inches. *FMD-007 Right Side Flange 1. Dimensions “K” and “L” are for center of gravity within 6 inches. 2.Spacial dimensions have a tolerance of 1.00 inches. 3. Dimension “P” is inlet-to-outlet flange distance, drains and vents may vary. 4. All FMD-130 600# and FMD-200 models have 8 lifting lugs. Table gives dimensions to outermost lugs. 5. All dimensions are subject to change without notice. 6. For TT configurations see specific outline 7. Dimension “H” max is the distance required to remove fully assembled piston assembly from the prover. Complete seal change may be done with piston not completely removed which requires 32”. |
|||||||||||||||||||||
| FMD-007 Weights | ANSI Pressure – 150# | ANSI Pressure – 300# | ANSI Pressure – 600# | ANSI Pressure – 900# | |||||
|---|---|---|---|---|---|---|---|---|---|
| Weight +/- 5% | LBS | KGS | LBS | KGS | LBS | KGS | LBS | KGS | |
| 1,730 | 790 | 1,755 | 800 | 1,780 | 810 | 2,000 | 910 | ||
| Weight with Crate +/- 5% | 2,130 | 970 | 2,155 | 980 | 2,180 | 990 | 2,400 | 1,090 | |
| Weight filled with Water +/- 5% | 1,830 | 830 | 1,855 | 840 | 1,880 | 855 | 2,100 | 955 | |
| FMD 007 – Motor Voltage – Phase Availability – Amperage Draw | ||||||||
|---|---|---|---|---|---|---|---|---|
| Motor HP | 24 VDC | 120 VAC | 220 VAC | 208-240 VAC | 440-460 VAC | |||
| – | Single Phase | Single Phase | 3 Phase | 3 Phase | ||||
| – | 50-60 Hz | 50-60 Hz | 50-60 Hz | 50-60 Hz | ||||
| 0.75 | 28.2 | 10.6 | 5.3 | 3.2 | 1.5 | |||
FMD-007 Approvals and Certifications
| ISO | 9001:2015, 17025:2017 |
| CE | Mach Dir:2006/42/EC, EN 12100-2:2003 |
| ATEX | 2014/34/EU II 2(1)G Ex db mb [ia Ga] IIB T3 Gb / -20 °C to +40 °C / Cert#: CSANe 25ATEX1007X |
| CSA (US & Canada) | Class I, Division 1, Groups C and D, Class I Division 2, Groups C and D – Maximum Operation Ambient 60°C – Class I, Division 1, Group D, Class I, Division 2, Group D – Maximum Operation Ambient 40°C – Cert#: 2137671 |
| IECEx | Ex db mb [ia Ga] IIB T3 Gb / -20 °C to +40 °C / Cert#: IECEx CSA 25.0009X |
| ABSA | CRN: OF1072.2 |
Documentation
Flow MD provides a complete line of meter provers for all your application needs. The FMD-007 Small Volume Prover provides exceptional performance, quality, field durability, and is a great choice for any meter proving application.
Flow MD Small Voume provers are compatible with all flow meter types including Coriolis, Turbine, Helical Turbine, Positive Displacement (PD) and Ultrasonic meter.
Designed for a wide range of liquid measurement applications (see our Applications Specific Prover Page or our Frequently Asked Questions for additional application information)
- All FMD Provers conform to API MPMS Chapter 4 Standards
- Materials of Construction: Stainless Steel – 304 or 316, Duplex Steel
- Standard flange size: 3″ ANSI B16.5
- Hardened Chrome finish on flow tube measurement section
- 1″ drain flanges, 1″ thermowell vents
FMD007 SMALL VOLUME PROVER IMAGES
